Garage Door Motor Replacement in Crump, TN | Garage Door USA
from $279
Garage Door Garage Door Motor Replacement Crump, TN
Opener motor and gear-assembly replacement when the unit can be salvaged, or full opener swap when it can't. We size the new motor to your door weight (1/2, 3/4, or 1.25 HP).
Garage Door Garage Door Motor Replacement Crump, TN
Crump's garage door motor replacement jobs land on our schedule daily. The housing here is predominantly single-family homes with attached garages, plus a core of older in-town residences, and we size every fix to match it rather than forcing a one-size part.
Crump sits in Tennessee's humid subtropical region — a warm, humid climate of sultry summers, abundant rainfall, and damp conditions that work hard on metal hardware. That puts real stress on garage door hardware: we routinely see high year-round humidity that rusts springs, cables, and fasteners, summer heat and moisture that swell wood doors and seize rollers, and frequent thunderstorms that drive rain into tracks and seals, and we fit parts rated to handle it.
Across River Heights and the surrounding Crump area, what brings Crump homeowners to us is corroded springs and cables in the humid air, sagging insulated panels softened by repeated heat and humidity, degraded weatherstripping from UV and moisture, and mildew and rust on shaded, north-facing doors — and we resolve it without a second visit.
Motor replacement is the right move when the opener's motor or gear assembly has failed but the rest of the unit (logic board, rail, sensors, remotes, wall console) is still in good shape. On a 6–9 year old LiftMaster or Genie, motor or gear replacement is typically 40–60% the cost of a full opener swap and gives you another 8–10 years of life. We carry motor and gear assemblies for the major brands and most models from the last 12 years.
Sizing matters. A motor sized for a light non-insulated 8x7 door will burn out fast on a heavy insulated 16x7. We size replacements by measured door weight: 1/2 HP for light residential, 3/4 HP for standard insulated, 1.25 HPS for heavy insulated or oversized doors. If the original opener was under-sized, we recommend an upgrade rather than matching the underspec original.
After motor replacement, we re-program travel limits, re-calibrate force settings, and verify auto-reverse on an obstruction test. The full visit takes 90–120 minutes including these checks. We include a 2-year parts and labor warranty on the motor replacement.
Capacitor failure (cheaper fix) or motor windings (full motor needed). Diagnostic determines which.
Burning smell during operation
Stop using the opener — motor is overheating, possibly due to gear strip or under-sized motor on heavy door.
Audible grinding from motor housing
Gear assembly stripping or bearing failure. Continued use destroys the gear; immediate service preserves a $149 gear swap vs. a $349 motor replacement.
Door moves slower than it used to
Worn motor windings can deliver less torque, causing slow travel. Diagnostic confirms motor vs. unrelated issues.
Smoke from motor housing
Severe motor failure or wiring fault — unplug immediately and call for emergency service.
Common causes & what we fix
Capacitor age
Start capacitors dry out over 7–10 years and stop providing torque to the motor. Often misdiagnosed as motor failure. $25–$89 capacitor swap usually fixes.
Gear assembly wear
Nylon worm gears strip after years of cycles. The gear, not the motor, is failing — gear replacement is much cheaper than motor replacement.
Motor winding burnout
Genuine motor failure from over-load on heavy doors or sustained operation against an obstructed door. Replacement is the fix.
Power surges
Grid events damage motor electronics. Surge protection prevents the most common failures.
Bearing failure
Motor bearings fail at 12–15 years on average. Replacement is possible but often makes more sense as full motor swap.
Our process
1
Call or schedule online. Call or book garage door motor replacement online, pick the 2-hour slot that works, and we lock it in within five minutes — tech name and photo included.
2
On-site diagnosis. We diagnose your garage door motor replacement in person, show you exactly what's wrong, and only then quote it. Most repairs are diagnosed free; minor service calls carry a $39 fee, waived if you proceed.
3
Flat-rate quote. Every garage door motor replacement is priced flat-rate and written down before we touch a tool. No hourly meter, no commissioned upsell — the techs earn a salary, not a cut.
4
Same-visit fix. Your garage door motor replacement in Crump is almost always a single-visit fix — our first-call rate is 96%. We test the door alongside you and leave the space cleaner than we found it.
How much does garage door motor replacement cost in Crump, TN?
For Crump homeowners pricing garage door motor replacement, the starting point is $279, quoted flat-rate in writing. The estimate holds for 30 days and never moves once you approve it — no add-ons mid-job, no hourly creep. Comparing garage door motor replacement cost in Crump? The written flat rate holds for 30 days, and 0% financing covers the larger jobs.
Garage Door Motor Replacement the United States starts at from $279, and every garage door motor replacement quote is flat-rate and presented in writing before work begins — no surprise add-ons, no hourly creep. Seniors (65+) and military save 10% on labor across all residential work, and Synchrony financing covers projects over $1,500 at 0% APR for the first 12 months, with fast approval and no prepayment penalty.
Why homeowners in Crump, TN choose us for garage door motor replacement
Crump homeowners book our garage door motor replacement because we're local to Tennessee's humid subtropical region, fast to dispatch, and honest about repair-versus-replace. 96% first-call fix rate, CSLB #1098234. Professional garage door motor replacement in Crump, TN means a named tech at your door and a flat-rate quote before any work starts.
The garage door motor replacement carries a decade-long workmanship guarantee — independent of the manufacturer's parts warranty. Fail because of how we installed it, and we fix the garage door motor replacement at no cost for ten years. 30,000-cycle springs hold a lifetime warranty for the original homeowner, with parts and accessories backed 1–5 years by item.
Our garage door motor replacement quotes in Crump are built on honest scope: no padded line items, salaried technicians with no commission to chase, and a transparent diagnostic so you see the real condition of every part. We'll tell you straight whether to repair or replace, and the flat-rate garage door motor replacement quote is written and good for 30 days.
Areas we serve for garage door motor replacement
We provide garage door motor replacement throughout Crump, TN and the surrounding Hardin County area. Serving River Heights and surrounding neighborhoods.
Context for garage door motor replacement in Crump: Hardin County is part of Tennessee. We serve the entire county, not just the easy-to-reach parts.
From Crump our garage door motor replacement extends to Adamsville, Savannah, Olivet, and Selmer, covering the in-between neighborhoods most one-truck shops skip. We handle garage door motor replacement around 38310 and the rest of Crump, TN on one daily route.
Garage Door Motor Replacement near you in Crump, TN
Searching "garage door motor replacement near me" from Crump? You've found a genuinely local option. Our crews work River Heights and the surrounding Crump area and neighboring Adamsville, Savannah, Olivet, and Selmer every day, so the tech who shows up actually knows your area — not a national call center routing the job out of state.
Crump is part of our greater Memphis, TN metro service area.
Our garage door motor replacement trucks reach ZIP codes 38310, 38327 and the nearby area. Since Crump conditions change garage door motor replacement reach times hour to hour, we hold the ETA until you call and can give you a real one. The dispatch line goes straight to an on-call tech, never to voicemail. "Local garage door motor replacement near me" in Crump should mean a tech who already works your street — with us it does.
Frequently asked about garage door motor replacement
Top questions homeowners searching for Garage Door Motor Replacement near me ask us:
Hardin County is part of Tennessee. We treat all of it as one service area — Crump and neighbors like Adamsville, Savannah, Olivet, and Selmer — with trucks staged to keep dispatch times short and the same flat-rate pricing in every community.
Local weather drives most of the repairs we run in Crump: with warm and high year-round humidity that rusts springs, cables, and fasteners, summer heat and moisture that swell wood doors and seize rollers, and frequent thunderstorms that drive rain into tracks and seals, the common failure modes are corroded springs and cables in the humid air, sagging insulated panels softened by repeated heat and humidity, degraded weatherstripping from UV and moisture, and mildew and rust on shaded, north-facing doors. Our Crump trucks stock the parts those conditions wear out first, so most jobs are a single visit.
2 years parts and labor on motor replacement. Manufacturer coverage on the motor itself varies (LiftMaster 5–10 years, Genie 5 years).
Light non-insulated: 1/2 HP. Standard insulated: 3/4 HP. Heavy insulated or oversized: 1.25 HPS. We size by measured door weight, not assumptions.
90–120 minutes including diagnostic, motor swap, travel and force programming, and obstruction test.
Under 8 years old: motor swap almost always. 8–12 years: depends on overall condition. 12+ years: full opener replacement usually better long-term.